Fork Lift Attachments

Fork Lift Baskets

Fork Lift Baskets

    Fork Lift Baskets are also referred to as Fork Lift Personnel Platforms. Both Fork Lift Baskets and Fork Lift Personnel Platforms can be fabricated in a variety of styles to suite your needs.

    Fork Lifts (sometimes spelled: Forklifts) are constructed to endure rough terrain construction type use and are designed, manufactured and tested in accordance with platform structural portion of ANSI/SIA A92.5-1992 (aerial lifts). Standard equipment includes mast guard, toe board, drain holes, (in floor or toe board), two attachment chains approximately four feet long in length with chain grab hooks for a perfect fit to your forklift. Fork lift tubes are 2.5" x 7.5" ID at 32" on centers. Unit doors have spring loaded, self-closing, in-swing doors.

    Custom design, other sizes and capacities can be furnished. When using Fork Lift Baskets for Personnel please refer to ASME B56.6 correct specifications section 8.25 (Platforms for Elevating Personnel).

    Call Toll Free 855.800.9568 or Request a Quote below


     

    Fork Lift / Forklift Attachments: Beams, Cuffs, Booms, Baskets

    Fork Lift Truck Attachments, (Fork Lift Attachments, etc.), are designed, manufactured and tested in accordance with code of OSHA Regulations. Quality constructed to exceed minimum code regulations for long life of heavy use. Certified with decal on unit.

    NOTE: This page only displays a few of the many different styles we manufacture. Custom design, other sizes and capacities can be furnished.

    Call us at 855.800.9568, email webinfo@eltlift.com, and use our Contact Us form.

    Fork Lift Attachment Hook Beams

    These units are handy to convert your lift to pick those items not accessible by normal fork lift lifting. Included are two attachment chains approximately 4 foot long with bolt type shackles and hooks with latches. These are designed, manufactured, tested and tagged to comply with lifting regulations. Painted Safety Yellow. Custom sizes and capacities also available!

    Expandable Fork Lift Boom

    The Expandable Fork Lift Boom, Model No. LB0712-4000. Shown in closed and extended positions. Many uses for this 4,000 pound capacity Lift Boom for those long awkward items and when you need to reach over some obstruction. This 7 to 12 foot extendible boom, in one foot increments, can save its cost in no time. Standard equipment includes two swivel type hooks with latches, two screw pin shackles and two attachment chains approximately four feet long with bolt type shackles and hooks with latches. Fork tubes are 2.5 x 7.5 inch ID at 10 inch on center.

    Fork Lift Attachment Hook Cuffs

    Fork Lift Attachment Hook Cuffs, Model No. LHC4, LHC5 and LHC7. These units are handy to convert your lift to pick those items not accessible by normal fork lift lifting. Each unit includes shackle and swivel hook with latch. These are designed, manufactured, tested and tagged to comply with lifting regulations. Painted Safety Yellow.

    Fork Lift Attachment Custom Material Trash Container

    The Skip Pan, Fork Lift Attachment Custom Material Trash Container. All material baskets and⁄or trash hoppers, (Skip Pans), are built to customers needs. Many different sizes, designs and capacities can be furnished.

    Custom Made Lifting Beam with Fork Lift Attachment

    Custom Made Lifting Beam with both Fork Lift and Crane capabilities. This unit is handy to reach and pick up those items not accessible by normal fork lift or crane lifting. Included are two hooks with latches. Designed, manufactured, tested and tagged to comply with lifting regulations. Painted Safety Yellow.

    Call us at 855.800.9568, email webinfo@eltlift.com, and use our Contact Us form.