Fork Lift Truck Attachments, (Fork Lift Attachments, etc.), are designed, manufactured and tested in accordance with code of OSHA Regulations. Quality constructed to exceed minimum code regulations for long life of heavy use. Certified with decal on unit.

The Expandable Fork Lift Boom, Model No. LB0712-4000. Shown in closed and extended positions. Many uses for this 4,000 pound capacity Lift Boom for those long awkward items and when you need to reach over some obstruction. This 7 to 12 foot extendible boom, in one foot increments, can save its cost in no time. Standard equipment includes two swivel type hooks with latches, two screw pin shackles and two attachment chains approximately four feet long with bolt type shackles and hooks with latches. Fork tubes are 2.5 x 7.5 inch ID at 10 inch on center.

The Fork Lift Attachment Blade, Model No. LB8. Save time, labor, flat tires and more by converting your fork lift into a small Dozer in seconds with construction type blade. Set blade level for debris removal with very little earth. Tilt mast forward for light grading and leveling. Excellent for moving masonry and other debris, leveling for scaffold setup, cleaning loose rocks, etc., from roads and for rebuilding roads after rain damage. Can pay for itself in a few days by eliminating much shoveling labor alone. Blade is 8 foot wide with fork tubes of 2.5 x 4.5 inch ID at 40 inch on center.

Fork Lift Attachment Hook Beams, Model No. LHB2, LHB3 and LHB4. These units are handy to convert your lift to pick those items not accessible by normal fork lift lifting. Included are two attachment chains approximately 4 foot long with bolt type shackles and hooks with latches. These are designed, manufactured, tested and tagged to comply with lifting regulations. Painted Safety Yellow.

Fork Lift Attachment Hook Cuffs, Model No. LHC4, LHC5 and LHC7. These units are handy to convert your lift to pick those items not accessible by normal fork lift lifting. Each unit includes shackle and swivel hook with latch. These are designed, manufactured, tested and tagged to comply with lifting regulations. Painted Safety Yellow.

The Fork Lift Attachment Utility Bucket, Model No. FLUB42. This
3⁄4 yard bucket can save labor in masonry and⁄or moving sand or dirt on job site and can be installed in seconds. Unit has fork lift tubes with 2-5⁄8" x 4-5⁄8" ID at 43" on center for quick attachment on the fork lift, as well as two attachment chains, approximately 30" long with bolt type shackles for chain attachment and adjustment and clevis grab hooks.

The Skip Pan, Fork Lift Attachment Custom Material Trash Container. All material baskets and⁄or trash hoppers, (Skip Pans), are built to customers needs. Many different sizes, designs and capacities can be furnished.

Fork Lift Attachment with Self Closing Hook. This fork lift attachment has a 5000 Pound Lifting Capacity and was custom made for Hanes Supply, Inc. Convert your fork lift to pick up items not accessible by normal fork lift lifting. This handy device can be positioned in seconds on almost any fork lift. Included is a Crosby Golden Gate Self Closing Hook. These are designed, manufactured, tested and tagged to comply with lifting regulations. Painted Safety Yellow.

Custom Made Lifting Beam with both Fork Lift and Crane capabilities. This unit is handy to reach and pick up those items not accessible by normal fork lift or crane lifting. Included are two hooks with latches. Designed, manufactured, tested and tagged to comply with lifting regulations. Painted Safety Yellow.