Spreader Beam End Caps

Loading...

Model RPEC – Standard Quote

Build your own custom spreader beam with ELT’s Round Pipe End Caps (RPEC). Designed for overhead lifting, our heavy-duty end caps allow you to assemble a complete spreader beam with the appropriate Schedule 80 pipe. The RPEC system offers a cost-effective, flexible solution for custom lifting needs while delivering the strength, quality, and safety expected from ELT lifting products. The system features a stable two-point lift configuration. Each unit is load-tested beyond ANSI/ASME B30.20 requirements, finished in safety yellow, and clearly marked with its rated capacity.

ELT offers a range of capacities and pipe-size configurations to meet a wide range of lifting requirements. View the available models below, or contact our team for assistance in selecting the right end caps for your application.

Mobel Number	Capacity Per Set (LB)	Capacity Per Set (TON)	Pipe Size (IN)	Max Length (FT)	Min Length (FT)	Sling Angle (DEGREES)	Shackle Size (IN)	Shackle Capacity (TONNE)
RPEC-03-15	30,000	15	3 SCH80	15	3.5	45	1 1/4	12
RPEC-03-26	52,000	26	3 SCH80	15	4	45	1-1/2	17
RPEC-04-26	52,000	26	4 SCH80	24	4.5	45	1-1/2	17
RPEC-05-26	52,000	26	5 SCH80	30	5	45	1-1/2	17
RPEC-04-50	100,000	50	4 SCH80	24	5	45	2	35
RPEC-05-50	100,000	50	5 SCH80	30	5.5	45	2	35
RPEC-06-50	100,000	50	6 SCH80	36	6	45	2	35
RPEC-08-50	100,000	50	8 SCH80	48	7	45	2	35
RPEC-10-60	120,000	60	10 SCH80	60	9	45	2-1/2	55
RPEC-06-90	180,000	90	6 SCH80	36	7	45	3	85
RPEC-08-90	180,000	90	8 SCH80	48	8	45	3	85
RPEC-10-130	260,000	130	10 SCH80	60	10	45	3	85

Downloadable Specification Sheet

Complete dimensions, shackle recommendations, minimum beam lengths, and approximate unit weights are available in the downloadable specification sheet. End caps are sold in pairs. Shackles and top rigging are available separately and are not included with the end caps.

Build the Beam You Need

SOURCE YOUR OWN PIPE

Use readily available Schedule 80 pipe to build your spreader beam without paying for a fully fabricated assembly.

CHOOSE THE RIGHT LENGTH

Build a beam that matches your exact lifting requirements instead of being limited to standard lengths.

LIFT WITH CONFIDENCE

Every ELT Round Pipe End Cap is load tested beyond ANSI/ASME B30.20 standards and clearly marked with its rated capacity.

Why ELT Is The Only Choice For Round Pipe End Caps

When a standard spreader beam isn’t the right fit, ELT Spreader Beam End Caps offer the flexibility to build a beam that matches your lifting application. By supplying your own pipe, you can fabricate a spreader beam to the required length while using professionally engineered lifting ends designed for overhead lifting.

Whether you’re replacing an existing beam, reducing shipping costs, or building a custom lifting solution, ELT end caps offer a dependable and economical alternative to buying a fully fabricated spreader beam.

Benefits

Build a custom spreader beam from locally sourced pipe
Lower transportation and shipping costs than a complete beam
Available in multiple capacities and pipe sizes
Two-point lift design for improved stability
Professionally engineered and load-tested
Rated and marked to meet OSHA requirements
Additional capacities and lengths available upon request

Engineered for Safe & Reliable Lifting

Designed for Custom Spreader Beams

The RPEC system enables users to fabricate their own spreader beam by pairing ELT end caps with the appropriate Schedule 80 pipe. This approach offers flexibility for projects requiring non-standard beam lengths and eliminates the need to purchase a fully fabricated beam. It’s an ideal solution for contractors and manufacturers who need a custom lifting beam without the added expense or lead time.

Two-Point Lift Design

The integrated two-point lift configuration improves load stability during lifting operations, making the system suitable for a wide variety of industrial lifting applications. By distributing lifting forces evenly, this design promotes balanced lifting and dependable performance when handling large or heavy loads.

Tested for Overhead Lifting

Every end cap assembly is tested beyond ANSI/ASME B30.20 standards, and a test certificate accompanies each unit to provide added confidence and traceability. This rigorous testing process helps ensure each product is ready for demanding overhead lifting applications before it leaves our facility.

OSHA Rated Markings

Each end cap is painted high-visibility safety yellow and permanently marked with its rated capacity on both sides to meet OSHA marking requirements. These clear markings make it easy for operators to quickly identify the proper lifting capacity and improve visibility on busy jobsites and in industrial facilities.

Engineered for Your Application

Standard capacities are available for a wide range of lifting requirements, while custom capacities and beam lengths can be manufactured to meet unique project specifications. If your application requires something outside our standard offerings, our engineering team can work with you to develop a tailored lifting solution.

The ELT Advantage

ELT designs and manufactures below-the-hook lifting equipment trusted in demanding industrial applications. Every Round Pipe End Cap is engineered for safe overhead lifting, tested to exceed ANSI/ASME B30.20 standards, and backed by knowledgeable engineering support.

Whether you need a standard model or a custom lifting solution, our team can help you select the right end caps for your application and provide fast quotes, custom capacities and beam lengths, nationwide shipping, and expert support from initial inquiry through delivery.

Ready to build your custom spreader beam? Contact ELT today to request a quote or call 1-855-800-9568 to speak with one of our lifting specialists.